Categories
Case Study Garage Equipment

Installing Safety Lining Around a MOT Bay

Installing safety lining around a MOT bay at a garage in Hereford.

When your MOT bay is installed it requires safety lining to meet VOSA standards. We apply precise, specially formulated, tough lining system around MOT bays and rolling roads. These can be Black and Yellow chevron or safety yellow lines and cross-hatching.

For commercial HGV customers, we install inspection pit safety markings and beam setter markings. This results in a professional and safety compliant finish.

Floor Marking
Maintaining a safe environment for people, whether it’s closed or open to the public is extremely important. Floor marking is used for a variety of reasons but the main purpose is to make people aware of boundaries in their working environment. A system should clearly identify walkways, product storage areas, parking bays, traffic routes and ‘keep clear’ zones. Saracen provides a large range of floor marking solutions that can be applied to most surfaces under almost any condition.

Safety Tape
Uses: Instant slip resistance for steps, ramps, paths, floors, vehicles etc. A range of slip resistant, self-adhesive tapes for use on concrete, wood, metal and painted surfaces.

Grip Strip
Uses: Ideal for internal and external steps, ramps, entrance ways, around machinery, decking etc. Strips of Grip Strip can give a more attractive finish than a conventional coating. On outdoor steps it also allows rainwater to drain away more easily. For use on concrete, wood, tiles, marble and other hard or painted surfaces.

Tapeline
Uses: Marking out areas for plant installation, identifying key boundaries on a temporary basis etc. Tapeline is a high quality vinyl tape for general light industrial use and temporary line markings. Tapeline can be applied by hand.

Permanent Line Marking Strips
Uses: Marking out loading bays, keep clear areas and hazard areas. Permanent Line Marking Strips are made from a semi rigid, very durable material for a longer lasting line than traditional PVC tapes. They can be used outdoors on non-porous surfaces or sealed concrete, providing the surface is clean and dry.

Easy Marking Tape
Uses: Marking out car parking bays and pedestrian routes (e.g. zebra crossings). It can also be used to mark out hazardous and safe areas. High specification adhesive lets you reposition the tape without leaving a mark. Once cured (about 24 hours) the adhesive is virtually permanent.

Heavy Duty Line Marking Tape
Uses: Marking out safety routes, escape routes and hazardous areas. Use it inside and out to mark down hatching for loading bays and ‘keep clear’ areas. The new photo luminescent grade is off-white and translucent in the light. Once the lights go off it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas even in the dark.

Stepmarker
Uses: Clearly highlights step edges and trip hazards. Most paints are worn out very quickly by the regular foot traffic on step edges. This coating can be applied as a single, quick drying layer.

Categories
Case Study Garage Equipment

Liftmaster MOT Bay Installation in Hereford

Liftmaster MOT Bay Installation in Hereford: Saracen supplied a full MOT bay package at a garage in Hereford including headlight beam setter, brake tester and a Majorlift jacking beam. The MOT bay was installed by Liftmaster.

All documents and certification were supplied in accordance with Vosa.

Categories
Case Study Garage Equipment

Bradbury Lift Installation

Bradbury Lift Installation: Saracen purchased a used Bradbury 2903 lift from a garage in Bristol. Our GEA accredited engineers then installed the lift to a prepared workshop in Gloucester.

The vehicle lift was tested and left with all the relevant certification including LOLER certification.

Categories
Case Study Garage Equipment

Garage Equipment Relocation

Garage Equipment Relocation: Our GEA accredited engineers re-located a customers own garage equipment in their new premises at Hay On Wye in Herefordshire.

The lifts were dismantled and relocated within a day by two engineers. A Tecalemit 3T scissor lift and 2 x 2 post lifts were installed.

Categories
Case Study Garage Equipment

Dunlop Lift Installation in Birmingham

Dunlop Lift Installation in Birmingham

Dunlop Lift Installation in Birmingham: We supplied and installed a new 2 post Dunlop DL240 lift to a garage in Birmingham.

The Dunlop DL240 is an excellent value for money, 4 tonne 2 post lift, to suit anyone’s budget.

Available in either single or 3 phase supply with an H frame to assist with unlevel floors.

This lift is ideally suited to car and light commercial vehicle workshops. Long wheel base vehicles are not suited.

Categories
Case Study Garage Equipment

Liftmaster Lift Installation in Hereford

Liftmaster Lift Installation in Hereford: We supplied and installed 3 new 2 post Liftmaster ATT Nussbaun lifts to a garage in Hereford, Herefordshire. The lift has the following features:

  • Low wear Nylatron-nut
  • Quiet operation
  • 5 years warranty on spindle & spindle-nut
  • Two motors integrated into columns
  • Resistant Poly-V belt
  • No floor connection
  • Complete quality control at all stages
  • 2-times telescopic asymmetric lifting arms
  • Optimum lifting spectrum
  • Automatic arms adjustment
  • Low lifting point from 75mm
  • Short lifting arms with swivelling 180°
  • Vehicles’ door can be opened completely
  • Simple and safe operation through integrated LED display in the columns
  • Plug and Play installation – the columns are pre-wired and fitted with plug
  • Height adjustable at top connection, without static function
Categories
Case Study Garage Equipment

Liftmaster Lift Installation in Ledbury

We supplied and installed a new 2 post Liftmaster Bendpak XPR-9T to a garage in Ledbury, Herefordshire. The lift has the following features:

  • Adjustable width for narrow or wide configuration
  • 8 piece 4×4 and van adapter kit included
  • Screw adaptors available at extra cost
  • Triple reach arms front and rear
  • CE Certified / ETL approved
  • Single point safety release
  • 4 Tonne lifting capacity
  • Power unit either side
  • Single piece columns
  • Automatic arm restraints
  • Electric/hydraulic power system
  • Large, 20 x 19 steel base plates
  • Safety locks in columns spaced every 3
  • Drop end arms provide a lower pad height
  • Self-lubricating glide polyethylene blocks
  • XPR9T chain lifting system combined with dual hydraulic cylinders
  • XPR9DT Direct drive cylinders
  • Comprehensive 3 year warranty and 5 year structural
Categories
Case Study Garage Equipment

Bendpak Lift Installation in Leominster

Bendpak Lift Installation in Leominster: We supplied and installed a new 2 post Liftmaster Bendpak XPR-10T to a garage in Leominster, Herefordshire. The lift has the following features:

  • Heavy duty dual 3/8”equaliser cables with over sized sheaves
  • 8 piece 4×4 and van adapter kit included
  • Screw adaptors available at extra cost
  • Dual hydraulic Direct Drive cylinders
  • CE Certified / ETL approved
  • Single point safety release
  • 4 .5 Tonne lifting capacity
  • Power unit either side
  • Automatic arm restraints
  • Electric/hydraulic power system
  • Single piece columns (not 168 model)
  • Padded overhead safety shut-off bar
  • Screw adaptors available at extra cost
  • Safety locks in columns spaced every 3
  • Self-lubricating glide polyethylene blocks
  • Drop end arms provide a lower pad height
  • Oversize 53 tall carriage for superior strength and durability
  • XPR-10T –168 Extra 24” high model total height 168”/4267mm
  • 4 x triple-telescoping arms provide increased range for lifting point access